Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
CNC Automatic Rebar, Steel Bar, Steel Wire Straightening and Cutting Machine
Basic Info.
| Model NO. | GT3-8 |
| Condition | New |
| Straightening Mode | Rotating Straightening Drum |
| Working Speed | 100-130 M/Min, Max. 150m/Min |
| Cutting Mode | Servo Motor Cutting |
| Control Mode | PLC |
| Total Motor Power | 4.0kw + 3.8kw+2.6kw |
| Working Capacity | 2.0 - 5.0 mm, Cold Rolled & Hot Rolled Round Bar |
| Wire Length | 0.1 - 6m, Adjustable or Customized |
| Model | Gt2-5 |
| Applicable Industries | Building Material Shops, Manufacturing Plant, Reta |
| Transport Package | Plastic Film and Wooden Box |
| Specification | 1000KGS |
| Trademark | RUNSUN |
| Origin | Hebei |
| HS Code | 8462510090 |
| Production Capacity | 30 Sets Per Month |
Product Description
Specification| 15 KW + 4.0KW(Servo Motor) | |
GT3-8 Steel Coil Wire Straightener and Cutter
GT Series High-Speed Steel Wire Straightening and Cutting Machine used for straightening and cutting 2-5/3-6/3-8mm hot-rolled and cold-rolled steel coil wire and deformed rebar. mostly used in steel mesh production plants, precast concrete component produces factory, normal building projects, construction, tunnel, bridge, dam, high-speed roads, High-speed trains, and so on.
Suitable for straightening and cutting Intelligent control: The machine is controlled by PLC , cold- rolled round bar/ribbed bar, hot-rolled touch screen,servo motor,and frequency converter. round/ribbed bar
Low failure rate World Advanced & Leading technology
1. Suitable for straightening and cutting cold-rolled round bar/ribbed bar, and hot-rolled round/ribbed bar.2. Intelligent control: The machine is controlled by PLC, touch screen and servo motor (Housine servo), and Frequency converter control working speed. Easy operation and working reliably3. Low failure rate: Due to the fine processing of parts and strict quality control, after installation and debugging, under normal working conditions, it can maintain trouble-free operation for a long time.4. World Advanced & Leading technology: Machine straightening and cutting technology 5. There are four working speeds: 70m/min, 100m/min, 130m/min, and 150m/min, Normally working speed: is 130m/min, if you finish the product length of less than 2m, suggest 70-100m/min. Max. Working speed: 150m/min6. High cutting accuracy: length tolerance: ≤ ±1mm7. High straightness: ≤ 2 mm/
